GLOBAL CACHE GC Contact Closure Sensor 2xLeder Kontaktsensor
Du må logge inn for å handle/se priser.
|
GLOBAL CACHE GC Contact Closure Sensor 2xLeder Kontaktsensor
|
Contact Closure Sensor
GC-SC1
The GC-SC1 detects the open-and-closed status of a pair of isolated contacts, such as a relay or switch. It is ideally suited for detecting contact closure on drapery controllers, thermostats, security contacts, and door strikes. The GC-SC1 filters out false triggers associated with typical contact bounce. The device can be plugged directly into the Global Caché GC-100 Network Adapter, which connects the sensor to the network. Additionally, the GC-SC1 will work with other controllers that provide 5V power and accept digital logic (TTL) input. The GC-SC1 connector is a standard 3.5mm stereo jack. This sensor can be used with iTach IR connectors in "Sensor" mode, but due to a design alteration must be connected to the unit with an audio crossover cable. The wires that need to be swapped are the tip and the ring.
Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et
generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er
forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som
gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er
uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.